Quick Code: P2081
4.5kW Electric Sauna Heater
This 4.5kW electric heater suits sauna cabins between 3 and 6 cubic metres. That covers most home builds, garden pods and single-bench rooms. Match the heater to the room and you get quicker warm-ups and lower running costs. Oversizing a small cabin wastes electricity. This model avoids that.
Key Features
- 4.5kW output, sized for sauna cabins of 3 to 6 cubic metres
- Holds up to 15kg of sauna stones for steady heat and steam
- Aluminised zinc casing resists corrosion in hot, humid air
- 304 stainless steel heating elements for long service life
- Two mechanical dials: temperature to 110C and a 3-hour timer
- Compact 409 x 269 x 559 mm body, wall-mounted
- Right-sized power keeps running costs down in small rooms
- Fixed-wired; installation by a qualified electrician (Part P / BS 7671)
A 4.5kW heater sized for small saunas
This 4.5kW electric heater suits sauna cabins between 3 and 6 cubic metres. That covers most home builds, garden pods and single-bench rooms. Match the heater to the room and you get quicker warm-ups and lower running costs. Oversizing a small cabin wastes electricity. This model avoids that.
The heater holds up to 15kg of sauna stones. Stones soak up heat and give it back slowly. The temperature stays level once the room reaches its set point. Ladle water over them for a burst of steam. Stones are sold separately.
Materials that cope with steam
Sauna air runs hot and wet. The casing is aluminised zinc, which resists corrosion through repeated heat and moisture cycles. The heating elements are 304 stainless steel. Both choices keep the unit working across years of daily use.
Controls and fitting
Two mechanical dials handle everything. One sets temperature up to 110°C. The other runs the timer for up to 3 hours. There is nothing to pair or program. The heater fixes to the wall and sits roughly 9cm off the floor for good airflow.
Specification
- Power output: 4.5kW
- Suits sauna rooms of 3 to 6 cubic metres
- Stone capacity: 15kg (stones sold separately)
- Maximum temperature: 110°C
- Timer: up to 3 hours
- Casing: aluminised zinc; elements: 304 stainless steel
- Dimensions: 409 x 269 x 559 mm
- Wall-mounted; fixed-wired by a qualified electrician (Part P / BS 7671)
- 4.5kW output, sized for sauna cabins of 3 to 6 cubic metres
- Holds up to 15kg of sauna stones for steady heat and steam
- Aluminised zinc casing resists corrosion in hot, humid air
- 304 stainless steel heating elements for long service life
- Two mechanical dials: temperature to 110C and a 3-hour timer
- Compact 409 x 269 x 559 mm body, wall-mounted
- Right-sized power keeps running costs down in small rooms
- Fixed-wired; installation by a qualified electrician (Part P / BS 7671)
