6kW Electric Sauna Heater

6kW of heat for medium sauna cabins

Step up to 6kW when your cabin measures 6 to 9 cubic metres. The extra power brings the room to temperature faster than a smaller unit. It also recovers quickly after the door opens. That counts when two or three people share a session and come and go.

A 20kg stone load sits at the core of the heater. The stones store heat and even out the swings. The bench stays warm between water pours. Add water for thick steam. Buy the stones separately and load them loosely so air can pass through.

Made for wet heat

Every session cycles the metal through heat, steam and cooling. The outer casing is aluminised zinc for corrosion resistance. The elements are 304 stainless steel. The build takes daily home use and busier commercial rooms in its stride.

Plain controls, simple wiring

You get two dials: temperature to 110°C and a timer to 3 hours. No screens, no app. It fixes to the wall about 9cm above the floor so heat circulates properly. The unit is fixed-wired and needs a qualified electrician (Part P / BS 7671).

Specification

• Power output: 6kW
• Suits sauna rooms of 6 to 9 cubic metres
• Stone capacity: 20kg (stones sold separately)
• Maximum temperature: 110°C
• Timer: up to 3 hours
• Casing: aluminised zinc; elements: 304 stainless steel
• Dimensions: 430 x 300 x 610 mm
• Wall-mounted; fixed-wired installation