Quick Code: P2094
Elite Ice Bath
The Elite Ice Bath is our largest inflatable tub. It carries around 450 litres and stretches to 155cm long. There is room to recline fully and let the cold reach the whole body.
Key Features
- Our largest inflatable plunge at around 450 litres
- Sculpted ergonomic shell supports the back, hips and shoulders
- 155cm long, so you can recline fully in the water
- 0.7mm PVC with reinforced drop-stitch walls, inflates to 8 PSI
- Air-gap insulated wall keeps the cold for longer
- Two 1/2" stainless steel chiller connectors, inlet and outlet
- Ships with insulated lid, pump, carry bag and repair kit
Elite Ice Bath: The Roomiest Reclined Plunge
The Elite Ice Bath is our largest inflatable tub. It carries around 450 litres and stretches to 155cm long. There is room to recline fully and let the cold reach the whole body.
What sets it apart is the moulded inner shape. The shell is sculpted to hold your back, hips, and shoulders as you lean in. Less strain on the joints means you can stay in the water longer and keep your breathing slow.
Built for regular use
The walls use 0.7mm skin-friendly PVC over reinforced drop-stitch panels. Inflated to 8 PSI, the tub feels firm and stable underfoot. An air-gap wall slows the warming between plunges, so the cold lasts.
- Around 450 litres, our largest inflatable bath
- Sculpted ergonomic inner shell
- 0.7mm PVC with drop-stitch reinforcement
Chiller and drainage
Two 1/2" stainless steel connectors sit on the body. One sends water to a chiller, the other returns it cold. This loop holds a set temperature for daily contrast work. An outlet valve empties the tub between water changes.
Included
- Elite Ice Bath tub
- Insulated inflatable lid
- Hand pump
- Carry bag
- Repair kit
Specifications
- Type: inflatable ergonomic reclined cold plunge
- Capacity: approx. 450 litres
- External size: 155cm long by 76cm wide by 62cm high
- Maximum pressure: 8 PSI
- Material: 0.7mm PVC with reinforced drop-stitch walls
- Insulation: air-gap wall
- Chiller ports: two 1/2" stainless steel connectors, inlet and outlet
- Use: indoor and outdoor
- Our largest inflatable plunge at around 450 litres
- Sculpted ergonomic shell supports the back, hips and shoulders
- 155cm long, so you can recline fully in the water
- 0.7mm PVC with reinforced drop-stitch walls, inflates to 8 PSI
- Air-gap insulated wall keeps the cold for longer
- Two 1/2" stainless steel chiller connectors, inlet and outlet
- Ships with insulated lid, pump, carry bag and repair kit
