Quick Code: P2093
Elite Ice Bath Chiller 1.0HP
The Elite 1.0HP Ice Bath Chiller is the top model for serious daily use. Its 1.0HP compressor pulls temperature down quickly. It also heats, so one unit covers cold plunges and warm recovery.
Key Features
- 1.0HP compressor gives the fastest cool-down in the range
- Cools to 3C and heats to 42C for contrast therapy
- Suits the largest baths, from inflatable to steel
- 18 litres/min minimum flow keeps big tubs circulating
- WiFi and digital panel control via iOS and Android
- Ozone sterilisation plus paper and hair filtration
- Standard 1/2-inch connectors with adapters included
- Ships with hoses, seals, a 2m cable and three 20-micron filters
The Fastest Cool-Down in the Range
The Elite 1.0HP Ice Bath Chiller is the top model for serious daily use. Its 1.0HP compressor pulls temperature down quickly. It also heats, so one unit covers cold plunges and warm recovery.
This chiller suits the largest baths. It matches premium tubs and bigger plunge systems, whether inflatable, wooden, composite, or steel.
Cools and heats
Cooling reaches 3°C for consistent cold exposure. Heating rises to 42°C for warm recovery and contrast sessions. The full working range runs from 3°C to 42°C.
A minimum flow rate of 18 litres per minute keeps circulation strong across larger volumes.
WiFi control
Set and monitor temperature from the digital panel or the app. Built-in WiFi works with iOS and Android.
- Remote temperature setting and monitoring
- Switch between cooling and heating modes
- Status and alert notifications
Ozone plus filtration
An ozone system helps reduce bacteria and odour between sessions. A built-in paper filter and hair filter capture debris. Together they keep maintenance low for frequent users.
Fittings and placement
The chiller uses standard 1/2-inch connectors, the common size for quality ice baths. Adapters suit both internal and external threads. It plugs into a standard mains socket and sits indoors or outdoors. Add freeze precautions near or below 0°C.
Specifications
- Compressor: 1.0HP
- Temperature range: 3°C to 42°C
- Minimum flow rate: 18 litres/min
- Voltage: 220-240V, 50Hz
- Control: digital panel and WiFi
- Filtration: paper filter and hair filter
- Sterilisation: ozone system
- Connectors: standard 1/2-inch
- Dimensions: 62 x 42.4 x 55.6 cm
- In the box: hoses, quick connectors, adapters, PTFE tape, rubber seals, 2m power cable, three 20-micron paper filters
- 1.0HP compressor gives the fastest cool-down in the range
- Cools to 3C and heats to 42C for contrast therapy
- Suits the largest baths, from inflatable to steel
- 18 litres/min minimum flow keeps big tubs circulating
- WiFi and digital panel control via iOS and Android
- Ozone sterilisation plus paper and hair filtration
- Standard 1/2-inch connectors with adapters included
- Ships with hoses, seals, a 2m cable and three 20-micron filters
